Wall Mounted

Veito Aero S 2500 Black

RRP: £199.99
Purchase this product now and earn 120 Points!

£195.00 £180.00

  • Energy efficient Carbon Infrared Heater
  • Waterproof IP44 for outdoor and indoor patio heater
  • Remotely Controlled
  • 2 Years Warranty


Veito Aero S 2500W Waterproof IP44 Wall and Ceiling Mounted Indoor and Outdoor Patio Heater, Black is our new, beautifully designed wall and ceiling mounted heater, suitable for indoor and outdoor, bathrooms and narrow spaces. Heating capacity can be set to four different levels: 1000W, 1500W, 2000W and 2500W. Every component in the Aero heater is optimised for high performance that includes the Veito heating element producing mid-wave infrared heat. Built using extruded aluminium designed to maximize thermal capacity. This heater is ideal for places such as homes, conservatories, patios, bathrooms, restaurants, gardens, bistros, cafes, offices, factories, gyms, farms etc.


Economical to Run

Veito heaters are economical to run. They work on infrared heat waves that are distributed throughout the room. Veito heaters are different from conventional heaters, as they start to heat as son as they are switched on.

Indoor and Outdoor

Veito Aero S2500 Patio Heater model is Waterproof IP44 certified which means that you can place this heater inside as well as outside. Each and every part of the heater has been carefully designed to provide strong and long-life performance.

Box Contains

1 x Aero S2500W Heater
1 x Remote Control
1 x Wall brackets and screws
1 x Product Manual


  • Power settings: 1000W-15000W-2000W-2500W
  • Space of use: 30 sqm
  • Power supply: AC 230 V 50/60 Hz
  • Product size (WxLxH): 750 mm x 55 mm x 208 mm
  • Product weight: 2.2 kg
  • Heating element lifespan: 10,000 h
  • Certificates: IP44, CE, TUV / GS
  • 3 pin UK plug

Veito Heaters In Antarctica

The Coldest Place on Earth

Additional information

Weight 4 kg
Dimensions 70 × 21 × 10 cm


There are no reviews yet.

Be the first to review “Veito Aero S 2500 Black”


This heater should be installed by a competent person. i.e. a qualified electrician.

For both wall and ceiling mounting, the lowest part of the heater must be located at or above a minimum height of 1.8m from ground level, so that the heater cannot be touched when in operation (fig.A and B).

Do not install the heater on or near a flammable surface. Observe the minimum safe distance between the heater body and flammable surfaces when mounting. The heater should always have a minimum clearance of 0.5m from a ceiling and adjacent walls.

If the heater is to be used outside, a weatherproof outlet is recommended.


braket 1 Install the two L connection parts to the back side of the heater with the screws supplied by keeping a suitable distance between them. braket 2 Install the other two L connection parts to the wall with the screws and wall plugs supplied by keeping the same distance between them.
braket 3 Place and secure the heater to the wall with the L connection parts by using the special screws supplied. braket 4 Decide the best position for the heater and fully tighten the screws.